Mg-Saline Water Xmas LED String Lights operated led string twinkle lights for holiday lighting decoration

●This product can be used for indoor&outdoor, it won’t be affected by bad weather like cloudy, rainy&snowy days.
● You can use seawater directly or water mixed with salt as energy.The reactant in the power supply box is non-toxic magnesium hydroxide, if directly pour into drainageway, it will not cause any environmental pollution.
● DC3V low voltage output, very safe and no battery pollution, real environmental protection.
● Very easy to operate and replace the magnesium bar&saline water.Simple and recyclable energy.
● String lights type: 100LEDs, 200LEDs. Light colors have warm white,cool white, 4 colors (RGBY).
● MCU three-gear control mode: Normally On/8 kinds of changing modes/Off. It has intelligent step-up IC to guarantee safety.
● Unique cartoon control box with European architectural style,exquisite design, a perfect combination of Christmas decorations and holiday scenes.
● Our exclusive mold, patent product, global pioneer.

Description

The specification of :

Product Name Mg-Saline Water Xmas LED String Lights
Water Capacity 300ml
Control House Size L89*W72*H196mm
Control House Color Red and White
Control Mode On /Auto Flash(8 flash modes) /Off
Output Voltage DC 3V
Output Current <100mA
LED Quantity 100 pcs丨200pcs
Light Color Warm White丨Cool White丨Colorful Color(Red Green Blue Yellow)
Working Tempature -15℃-55℃
Mg Bar Using Time 25-35 days(for 100pcs LEDs 35days, 200pcs LEDs 25 days)
Salt Water Changing Time every 5-7 days
Material ABS/Rubber/Cu/Mg
Salt Weight 15g
N.W. 398g / 532g
100LEDs 2m leading wire, distance between two lights:10cm, total 12m.
 200LEDs 2m leading wire, distance between two lights:10cm, total 22m.
Lighting time&Mg bar replacement 24Hrs working time,100LEDs: 35 days / 200LEDs: 25 days
Water replacement cycle 24Hrs working time,100LEDs: 7 days / 200LEDs: 5 days

How it works for Mg-Saline Water Xmas LED String Lights operated led string twinkle lights for holiday lighting decoration?
Magnesium-air fuel cell technology has the same components as any other battery technology. There’s a magnesium anode and a gas-diffusion (air) cathode, with salt water as the electrolyte. it’s technically called an oxidation-reduction reaction. Using the oxidation-reduction reaction that occurs between the magnesium and the water.
The air cathode is the current collector for the system. The air cathode is a membrane that breathes, and allows oxygen from the air to enter the cell to facilitate the oxidation-reduction reaction.
work of Mg-Saline Water Xmas LED String Lights operated led string twinkle lights for holiday lighting decoration
1.Add Water&Salt,2.Control Box Assembling,3.Saline Water Replacement,4.Mg Bar Replacement
Installation Process of Mg-Saline Water Xmas LED String Lights operated led string twinkle lights for holiday lighting decoration:

Control House Assembly
Please change the salt water every 5-7 days
Replacing the Mg Bar
The Mg bar can be used for 25-35 days(QF-167A10 can be used for about 35 days, and QF-167A20 can be used for about 25 days). And when the Mg bar is dissolved, you just need to replace a new Mg bar. The LED String light is thus reusable.

use of Mg-Saline Water Xmas LED String Lights operated led string twinkle lights for holiday lighting decoration

Pls Note:
1. It’s OK to use seawater directly, or combine water with salt.
2. The reactant is non-toxic magnesium hydroxide, it will not cause any environmental pollution if pour into drainageway, you can rest assured of that.
3.As the water tank has sediment of the dissolved Mg bar, you should replace the saline water every 5-7days under 24Hrs working time condition.The saline water must be poured out if not used for more than one week.
4.When loading saline water without starting the power button, the Mg bar will not consume and there is no sediment increasing as well. The replacement cycle is based on the total discharging time. So you can extend the time to replace water. Open the water tank to check sediment in it if necessary.When water levels fall and find hard lumps, the water have to be replaced.
5. As the Mg bar is consumable, if run out, please contact the dealer for purchasing there.

Troubleshooting:
1.No light emitting.
▼To check whether the water is too little, if enough, please add a pinch of salt.
▼Please check the Mg bar first, and replace a new one if it is run out.
▼If the indicator light is on but no light emitting, please press the power button for 10 seconds or so and you will see the LEDs light up slowly.
2. Water leaking.
▼When open the vent plug, do not dump water tank.
▼Please check the buckle of control box and Mg bar whether they are correctly fixed.

Packing Specification:
● Inner box: 105*118*205mm
● Carton size: 53.5*24.6*22.5cm 10pcs/CTN
● 200LEDs N.W.: 5.3KG G.W.: 6KG
● 100LEDs N.W.: 4.3KG G.W.: 5KG
Product Application of Mg-Saline Water Xmas LED String Lights operated led string twinkle lights for holiday lighting decoration:
The product is widely used for Christmas, Halloween, Valentine ’s Day, New Year festival decoration, etc.
Decorate stage, shopping mall, courtyard, corridor, garden and other places.
application of Mg-Saline Water Xmas LED String Lights operated led string twinkle lights for holiday lighting decoration

Additional information

Water Capacity

300ml

Light Color

Warm White丨Cool White丨Colorful Color(Red Green Blue Yellow)

Mg Bar Using Time

25-35 days(for 100pcs LEDs 35days, 200pcs LEDs 25 days)

Salt Water Changing Time

every 5-7 days

100LEDs

2m leading wire, distance between two lights:10cm, total 12m.

200LEDs

2m leading wire, distance between two lights:10cm, total 22m.

Lighting time&Mg bar replacement

24Hrs working time,100LEDs: 35 days / 200LEDs: 25 days

Water replacement cycle

24Hrs working time,100LEDs: 7 days / 200LEDs: 5 days